Unboxing your new Road/Gravel BikeUpdated 7 months ago

Once you receive your bike from us it will be delivered as the picture shows, simple assembly is required.

Remove the packing from the bike, and fit the seatpost. Please ensure you tighten this to the recommended torque setting using a torque wrench.

Next fit the front wheel, normally using a 6mm allen key. Make sure the axle has grease on it, this can avoid unwanted creaks and stop the axle seizing in the fork

Next fit the handlebars, the position of the bars is personal preference however we recommend having the top of the bar run parallel to the ground. Using a 4mm Allen key and torque wrench tighten the stem from corner to corner. Once this is done your bike will be ready to have the pedals fitted and ride. (see our pedal fitting guide for assistance with this)